{mosimage}2003-06 Infiniti G35 Sedans come with the integrated foglights that are built into the headlights. Some of us might think that this means no aftermarket foglight bulbs! Wrong. Follow the step by step procedure below and replace your oem fogs with ultra bright aftermarket foglight bulbs.
Tools Needed for the Project:
- 10mm Socket and a Ratchet
- Phillips Screwdriver
- Flat-Head Screwdriver
- Pliers
Step 1 – Access to the Rear of the Headlight Housing
In order to access the rear of the headlight make sure the wheel is turned all the way in.
Step 2 – Removing the Fender Liner
Take out the (3) clips on the inner fender liner using the flat-head screwdriver.
{mosimage} {mosimage}
One clip is located directly below the upper control arm, one is located directly above the tire and third one is located few inches above the first clip.
{mosimage} {mosimage}
With the help of the philps screwdriver remove the screw located right above the corner light.
{mosimage}
Step 3 – Removing the Fender Liner From Under The Car
There are (5) 10mm bolts located under the car. Use the 10mm socket to remove these bolts and pull the fender out of the wheel well.
{mosimage} {mosimage}
{mosimage}
Last but not least – Remove the last (2) clips that hold the fender in the wheel well from under the car and pull the fender liner all the way
{mosimage} {mosimage}
Step 4 – Removing the Dust Cap
Looking at the back of the light assembly, Unscrew the dust cap from the housing (Counter-Clockwise)
{mosimage} {mosimage}
Step 5 – Removing the Connector
Remove the connector from the foglight bulb.
{mosimage} {mosimage}
Step 6 – Remove The Stock Bulb
Once the back of the bulb is visible, pull the silver bracket and remove the stock bulb.
{mosimage} {mosimage}
Replace it with your new bulb and just reverse the process to put everything back together. I used PIAA Xtreme White H4 Bulbs that are VERY BRIGHT.
{mosimage} {mosimage}
Please leave feedback on how helpful this article was at [email protected]
